Gaggenau RY492904, Руководство пользователя, Страница: 17 / 34

17
Operating the appliance
en
Eco mode
Eco mode switches the appliance to energy-saving
operation.
The appliance automatically sets the following
temperatures:
▯
Refrigerator compartment: +6°C
▯
Freezer compartment: –16°C
Switching Eco mode on or off
1 Press
à
button to open the main menu.
2 Press
C
button to move to the menu item Eco
mode .
3 Press
I
/
&
button.
The temperature is changed and the display shows the
new temperature. When Eco mode is switched off, the
recommended temperature is set.
Note:
You can also switch Eco mode on or off by adjusting the
temperature with the
A
/
@
buttons.
Reset water filter counter
If you are using a water filter in your appliance instead
of the particle filter supplied, you have to reset the water
filter counter whenever you have replaced the water
filter.
~
"Switching the water filter counter on and off"
on page 18
1 Press
à
button to open the main menu.
2 Use
C
button to move to the menu item Reset water
filter counter .
3 Press
™
button to confirm and confirm the query
again with
™
button.
Note:
If you cancel the query or take longer than 10 seconds
to make an input, the water filter counter will not be
reset.
Self-test
This function can be used to start fault analysis on your
appliance.
~
"Appliance self-test" on page 33
Setting the brightness of the control
panel
1 Press
à
button to open the main menu.
2 Press
B
button to move to the menu item Basic
settings .
3 Press
™
button.
4 Press
%
button to open the menu item Brightness .
5 Press
B C
buttons to set the required brightness.
6 Press
™
button.
The setting is saved.
7 Press
'
button to exit the menu.
Setting up the display screen
You can choose between the settings Reduced and
Standard . With the setting Reduced only the
temperature and active special functions are displayed
on the control panel after a short period without
operation. If the touch fields are touched, all buttons
will be visible again.
With the setting
Standard all buttons always remain
visible.
1 Press
à
button to open the main menu.
2 Press
B
button to move to the menu item Basic
settings .
3 Press
™
button.
4 Use
C
button to move to the menu item Display
screen .
5 Press
%
button.
6 Press
B C
buttons to move to the required setting.
7 Press
™
button.
The setting is saved.
8 Press
'
button to exit the menu.
Setting the touch field colour
1 Press
à
button to open the main menu.
2 Press
B
button to move to the menu item Basic
settings .
3 Press
™
button.
4 Press
C
button to move to the menu item Touch
field colour .
5 Press
%
button.
6 Press
B C
buttons to move to the required setting.
7 Press
™
button.
The setting is saved.
8 Press
'
button to exit the menu.