Gaggenau RW414964, Руководство пользователя

Страница: 8 / 24

8
en
Installation and connection
Before using the appliance for the
first time
1 Remove information material, adhesive tape and
protective film.
2 Clean the appliance.
Electrical connection
Caution!
Do not connect the appliance to electronic energy saver
plugs.
Note: The power source used by the appliance must not
be a roof solar power generation or electricity
conservation system.
Please connect the appliance to Taipower´s power
network.
1 After installing the appliance, wait at least 1 hour
before connecting it to avoid damaging the
compressor.
2 Connect the appliance via a correctly installed
socket.
The socket must comply with the following data:
Outside Europe: Check whether the indicated
current type of the appliance corresponds with the
values of your power supply. Appliance
specifications are on the rating plate.
~
"Getting to know your appliance" on page 9
3 Connect the appliance to a socket near the
appliance.
The socket must also be freely accessible after
installation of the appliance.
m
Warning – Risk of electric shock!
If the length of the mains cable is insufficient, do
NOT use multi-outlet power strips or extension
leads.Instead, please contact Customer Service for
alternative solutions.
Socket with 220 V ... 240 V
Conductor 60 Hz
Fuse 10 A ... 16 A