Gaggenau RT 200, Руководство пользователя, Страница: 22 / 28

en
Troubleshooting
22
13 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
Fault Cause and troubleshooting
The LED lighting does
not work. The illuminant is defective.
1.
Switch off the appliance. → Page 15
2.
Disconnect the appliance from the mains.
Unplug the appliance from the mains or switch off
the circuit breaker in the fuse box.
3.
Remove the illuminant cover to the left.
4.
Replace the illuminant.
Replacement illuminant: 220–240 V AC, E14 bulb
holder, see the defective illuminant's wattage.
The light switch is jammed.
▶
Check whether the light switch can be moved.
The temperature dif-
fers greatly from the
setting. Different causes are possible.
1.
Switch off the appliance. → Page 15
2.
Switch the appliance back on after five minutes.
→
Page 15
‒
If the temperature is too warm, check the temper-
ature again after a couple of hours.
‒
If the temperature is too cold, check the temper-
ature again on the following day.