Gaggenau DI250441, Руководство по эксплуатации

Страница: 17 / 32

17
Operating the appliance
Switching on the appliance
1
Turn on the tap fully.
2 Switch on ON/OFF switch
(
.
The display of the last selected programme
flashes. This programme remains selected if no
other programme button
0
is pressed. The
expected programme duration flashes on the
digital display
)"
.
3
Press the START button
P
.
The programme starts running.
Remaining running time display
When the programme is selected, the remaining
running time of the programme is indicated on the
digital display
)"
.
The running time is determined during the programme
by the water temperature, the number of utensils as
well as the degree of soiling and may vary (depending
on the selected programme).
Timer programming
Timer programming *
* depending on model
You can delay the start of the programme in 1-hour
steps up to 24 hours.
1
Close the door.
2
Switch on ON/OFF switch
(
.
3
Press button
@
+ until the digital display
)"
jumps to
œ
:
‹‚
.
4 Press
@
+ or – button until the displayed time
corresponds with your requirements.
5
Press START button
P
, timer programming is
activated.
6
To delete timer programming, press the
@
+ or
– button until
)"
œ
:
‹‹
is indicated on the digital
display.
You can change your programme selection at any
time until the programme starts.
End of programme
The programme has ended when the value
‹
:
‹‹
is
indicated on the numerical display
)"
.
Automatic switch off after end of
programme or interior light*
Automatic switch off / interior light
* depending on model
To save energy, the dishwasher can be automatically
switched off 1 min or 120 min after the programme
ends.
The setting can be selected from
˜
:
‹‹
to
˜
:
‹ƒ
.
1
Close the door.
2
Switch on ON/OFF switch
(
.
3
Hold down programme button
#
and press
START button
P
until
•
:
‹
...
is indicated on the digital display.
4 Release both buttons.
The LED for button
#
flashes and the digital
display
)"
displays the factory setting
•
:
‹…
.
5 Keep pressing programme button
#
until the
value
˜
:
‹
... is indicated on the numerical display
)"
.
To change the setting:
1
Press programme button
3
.
Each time the button is pressed, the set value
increases by one level; when the value of
˜
:
‹ƒ
has been reached, the display jumps back
to
˜
:
‹‹
.
2
Press START button
P
.
The set value is saved.
˜
:
‹‹
Appliance does not
switch off automatically.
The interior light
1"
comes on when the door is opened
irrespective of whether the ON/OFF
switch
(
is switched on or off.
When the door is closed the light
is off. If the door is open for longer
than 60 min., the light switches off
automatically. The interior light
1"
is lit only when the set value
˜
:
‹‹
is
selected.
˜
:
‹‚
Appliance switches off after 1 min.
˜
:
‹ƒ
Appliance switches off after 120 min.