Gaggenau DF480101, Инструкция по применению

Страница: 53 / 76

Troubleshooting
en
53
Fault Cause and troubleshooting
Appliance door opens
too wide when activ-
ated. Door is not correctly adjusted.
▶
Adjust the appliance door as described in the in-
stallation instructions.
Appliance door does
not open at the end of
the programme. Automatic door opening is not activated.
▶
Activate the automatic door opening.
Childproof lock is activated.
▶
Deactivate the childproof lock.
Door is not correctly adjusted.
▶
Adjust the appliance door as described in the in-
stallation instructions.
The door gap must be at least 70 mm to 120 mm.
Appliance door and door seal are soiled.
▶
Clean the appliance door and door seal with a
damp cloth and a little washing-up liquid.
Wrong screws used to adjust the door gap.
▶
Use size 4X30 bolts to adjust the door gap.
The bolts are included in the scope of supply.
If you use bolts that are too long, this can deactiv-
ate the function of automatic door opening.
The safety device switches off automatic door open-
ing.
▶
Call Customer Service. → Page 70
Appliance door brushes against the appliance or kit-
chen cabinets
▶
Install the appliance correctly as described in the
installation instructions and align.
Appliance door opens
too wide at the end of
the programme. Door is not correctly adjusted.
▶
Adjust the appliance door as described in the in-
stallation instructions.
The door gap must be at least 70 mm to 120 mm.
Wrong screws used to adjust the door gap.
▶
Use size 4X30 bolts to adjust the door gap.
The bolts are included in the scope of supply.
If you use bolts that are too long, this can deactiv-
ate the function of automatic door opening.
Appliance door opens
accidently. Automatic door opening activated accidently.
▶
To prevent the appliance door opening accidentally,
activate the childproof lock.