Gaggenau DF261101, Инструкция по применению

Страница: 55 / 68

Troubleshooting
en
55
Fault Cause and troubleshooting
Wipeable or water-sol-
uble coatings are
present inside the ap-
pliance or on the
door. Special salt dispenser is not screwed tight.
▶
Screw the special salt dispenser tight.
Stubborn white coat-
ings are present on
tableware, inside the
appliance or the door. Detergent substances are deposited there. These
coatings cannot generally be removed with chemicals.
▶
Change your detergent → Page 31 .
▶
Clean the appliance mechanically.
Hardness range is set incorrectly or the water hard-
ness is too high.
→
"Overview of water hardness settings", Page 27
▶
Set the Water softening system to the water hard-
ness or add special salt.
3in1/organic/eco detergent is not effective enough.
▶
Set the Water softening system to the water hard-
ness and use separate detergents (proprietary de-
tergent, special salt, rinse aid).
Too little detergent is being used.
▶
Increase the amount of detergent used or change
Detergent →
Page 31 .
Washing programme selected too weak.
▶
Select a more intensive washing programme.
→
"Programmes", Page 19
▶
Adjust the sensitivity of the sensors.
→
"Sensors", Page 12
Tea residue or lipstick
marks on tableware. Washing temperature is too low.
▶
Select a programme with a higher washing temper-
ature.
→
"Programmes", Page 19
Too little detergent is being used or is unsuitable.
▶
Use a suitable Detergent → Page 31 and follow the
manufacturer's instructions for the amount to be
used.
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
▶
Only remove large remnants of food and do not
prerinse tableware.
▶
Adjust the sensitivity of the sensors.
→
"Sensors", Page 12