en-us
Troubleshooting
32
Issue
Cause and troubleshooting
Silverware is not dry.
Silverware not arranged properly in the silverware basket or silverware drawer.
Droplets can form on the contact points of silverware.
1.
Arrange silverware individually where possible.
2.
Avoid points of contact.
Appliance interior still wet after
wash cycle.
Not an error. Condensation drying creates water droplets in the tub. This is normal.
Moisture in the air condenses on the inside walls of the appliance, runs off, and is
pumped out.
No action required.
Food remnants on dishware.
Dishware was placed too close together or rack is overfilled.
1.
Arrange dishware with sufficient space in between.
The spray jets must reach the surfaces of the dishware.
2.
Avoid points of contact.
Spray arm rotation of the lower spray arm is blocked.
▶
Arrange dishware so it does not obstruct spray arm rotation.
Spray arm nozzles are blocked.
▶
Clean the Spray arms
.
Filters are dirty.
▶
Clean the filters.
Filters are inserted incorrectly and/or not engaged.
1.
Insert the filters properly.
2.
Twist filters into place.
Selected wash cycle is too light.
▶
Select a more intensive wash program.
▶
Adjust the sensitivity of the sensors.
Dishware has been precleaned too intensively. Then the sensors choose a lighter
cycle. Stubborn remnants cannot be entirely removed.
▶
Only remove large remnants of food and do not pre-rinse dishware.
▶
Adjust the sensitivity of the sensors.
Tall narrow containers in corner areas are not rinsed out adequately.
▶
Do not position tall narrow containers at too great an angle or in corner areas.
Upper rack on right and left not set to same height.
Содержание DF211701
Страница 1: ...en us Use and Care Manual DF211701 Dishwasher Gaggenau...
Страница 43: ......
