Gaggenau DF210700, Руководство пользователя, Страница: 30 / 40

en-us
Troubleshooting
30
Issue Cause and troubleshooting
Plastic parts are discolored. Dishwashing temperature is too low.
▶
Select a program with a higher dishwashing temperature.
Dishware has been precleaned too intensively. The sensors then choose a weaker
program. Stubborn soiling cannot be entirely removed.
▶
Only remove large remnants of food and do not prerinse dishware.
▶
Adjust the sensitivity of the sensors.
→
"Sensors", Page 5
There are removable streaks on
glasses, glassware with a metallic
appearance and silverware.
Amount of rinse aid to be dispensed is set too high.
▶
Set the rinse aid system to a lower setting.
No rinse aid has been added.
▶
→
"Adding rinse aid", Page 15
There is detergent residue in the final rinse. Lid of detergent dispenser is blocked by
dishware and will not open fully.
1.
Arrange dishware in the upper rack so the tab collecting tray is not obstructed by
dishware.
→
"Loading dishware", Page 18
Items of dishware are blocking the dispenser lid.
2.
Do not place dishware or fragrance dispensers in the tab collecting tray.
Dishware has been precleaned too intensively. The sensors then choose a weaker
program. Stubborn soiling cannot be entirely removed.
▶
Only remove large remnants of food and do not prerinse dishware.
▶
Adjust the sensitivity of the sensors.
→
"Sensors", Page 5
Irreversible clouding of glassware. Glasses are not dishwasher-proof, only suitable for dishwashers.
▶
Use dishwasher-proof glasses.
Glasses are usually only suitable for cleaning in a dishwasher, i.e. long-term
wear or long-term changes must be expected.
▶
Avoid a lengthy steam phase (standing time after wash cycle ends).
▶
Use a program with a lower temperature.
▶
Set the softening system to the water hardness.
▶
Use detergent with a glass protection component.
Detergent residue is present in the
detergent dispenser or the tab col-
lecting tray.
Spray arms were blocked by dishware so detergent was not rinsed out.
▶
Check that the spray arms are not blocked and can rotate freely.
Detergent dispenser was damp when detergent was added.
▶
Only add detergent to the detergent dispenser when dry.
Excessive formation of foam oc-
curs.
Hand soap got in the rinse aid dispenser.
▶
Immediately add rinse aid to the dispenser.
→
"Adding rinse aid", Page 15
Rinse aid has been spilled.
▶
Remove the rinse aid with a cloth.
Detergent or machine care product used causes excessive foaming.
▶
Change the brand of detergent.
Connection to home network is not
established.
WLAN on router is not active.
▶
Check the wireless network connection of your router.
WLAN display is flashing. Connection to home network is not available.
▶
Activate the wireless network connection on your router.
Home Connect cannot be imple-
mented correctly.
Home Connect set incorrectly.
▶
Please consult the documents supplied for Home Connect.
There is a technical error.
▶
Please consult the information on support in the documents supplied for
Home Connect.
Special salt refill indicator lights up. Insufficient special salt.
▶
Add Special salt.
Sensor does not detect special salt tablets.