Gaggenau DF 250, Руководство пользователя

Страница: 14 / 68

en
Installation and connection
14
Sensor setting Description
Very sensitive Adjusts the programme
strength for difficult condi-
tions of use, e.g. stubborn
dried-on food remnants. Re-
commended setting when
using organic or ecological
detergents containing low
levels of active agents. En-
ergy and water consumption
are adjusted accordingly.
Installation and connec-
tion
To ensure proper operation, connect
the appliance to the power and water
supply correctly. Observe the specified
criteria and the installation instructions.
Scope of supply
After unpacking all parts, check for any
damage in transit and completeness of
the delivery.
If you have any complaints, contact the
dealer who sold you the appliance or
our Customer Service.
Note:
The appliance was tested at the
factory to check it is in working order. It
is possible that water has left marks on
the appliance. These marks will disap-
pear after the first wash cycle.
The delivery consists of the following:
¡
Dishwasher
¡
Instruction manual
¡
Installation instructions
¡
Warranty
1
¡
Installation material
¡
Steam guard plate
1
¡
Rubber apron
1
¡
Mains cable
¡
Quick reference guide
1
Installing and connecting the
appliance
You can position your built-under or in-
tegrable appliance in a fitted kitchen
between wooden and plastic walls. If
you subsequently install your dish-
washer as a free-standing appliance,
you must stop it from tipping over, e.g.
by screwing it to the wall or installing it
under a continuous worktop that is se-
curely connected to adjacent cabinets.
1.
Follow the safety instructions.
→
Page 4
2.
Follow the instructions for electrical
connection. →
Page 15
3.
Check the Scope of supply
→
Page 14 and the condition of the
appliance.
4.
Consult the installation instructions
for the installation dimensions re-
quired.
5.
Make the appliance level using the
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
6.
Install the drainage connection.
→
Page 14
7.
Install the drinking water connection.
→
Page 15
8.
Connect the appliance to the electri-
city supply.
Drainage connection
Connect your appliance to drainage
connection so dirty water is discharged
via the wash cycle.
Installing the drainage connection
1.
Consult the installation instructions
supplied for the steps required here.
1
Depending on the appliance specifications