en
Basic operation
12
4.
Turn the control knob anti-clockwise to .
a
The illuminated ring on the control knob lights up
blue.
a
The Home Connect settings menu is open.
5.
Set Home Connect.
6.
Exit the Home Connect settings menu in the same
way.
8.2 Setting an operating mode
Requirement:
On delivery, the appliance is set to circu-
lating-air mode.
▶
To change the appliance to air extraction mode,
refer to the basic settings.
8.3 Colour shades of the illuminated rings
The illuminated ring on the control knob lights up or-
ange during operation. You can choose between two
colour shades.
You can change the colour shades so that all of the il-
luminated rings across several appliances light up in
the same shade.
"Changing the colour of the illuminated ring",
9 Basic operation
9.1 Setting the hob
Notes
¡
If the appliance has not been connected to your
home network or the connection has been broken,
the network connection initial set-up will be activated
whenever you switch on the hob.
¡
Never operate the appliance without the filter and
the overflow container.
¡
If you place cookware on a flexible cooking zone,
the hob detects the cookware and the cooking zone
is automatically selected. You can find more inform-
ation about this under
"Flexible cooking zone", Page 15
¡
If there is no cookware on the cooking zone or if the
appliance does not detect the cookware, the selec-
ted power level flashes and the illuminated ring on
the control knob lights up orange. After approx.
nine minutes, the appliance switches the cooking
zone off. The illuminated ring on the control knob
flashes. Turn the control knob to ; the illuminated
ring on the control knob goes out.
1.
Use cookware with a suitable diameter.
‒
Ensure that the base of the cookware sits within
the marked cooking zones.
2.
Use the control knob to select the cooking zone.
3.
Push in the control knob and turn it to the required
power level.
a
The selected power level lights up on the display.
a
The illuminated ring on the control knob lights up.
Notes
¡
In order to protect the appliance's electronic parts
from overheating or surge currents, the hob may
temporarily reduce the power level.
¡
In order to prevent the appliance from producing ex-
cess noise, the hob may temporarily reduce the
power level.
9.2 Switching the hob off
▶
Turn all of the control knobs to 0.
a
The residual heat indicator lights up and the illumin-
ated ring on the control knob flashes until the cook-
ing zone has cooled down.
9.3 Cooking instructions
This is where you can find an overview of useful cook-
ing instructions for dishes or for using cookware.
¡
When heating up puree, cream soups or thick
sauces, stir occasionally.
¡
To preheat, set power level 10–12.
