Gaggenau CV282110, Инструкция по эксплуатации

Страница: 21 / 52

21
Transfer function
en
Transfer function
Transfer function
You can use this function to transfer the settings of one
hotplate to another.
This function can also be used on the flexible cooking
zones.
Note: You can find additional information on the correct
positioning of cookware in the section entitled
~
"Flex
function"
1 Remove any cookware from the hob.
The hotplate indicator will start flashing. The
hotplate is not heating up.
2 Set the cookware down on a flexible hotplate within
the next 90
seconds. The new hotplate will be
detected and the
ˆ
symbol will light up. The
applied heat setting will flash in the hotplate
display.
3 Use the twist knob to select the new hotplate within
90
seconds. The setting has been transferred.
Notes
– Move the cookware to a hotplate that is not
switched on, which has not yet been preset and on
which no other cookware has yet been placed.
– If the Flex function is activated by moving an item of
cookware across the flexible cooking zone, the
settings will be automatically applied.
– A set cooking time or the cooking sensor function
will also be transferred to the new hotplate. The
frying sensor function will not be transferred.
– The booster functions can only be moved from left
to right or from right to left when none of the
hotplates are active.
– If a new item of cookware is set down on another
hotplate before the settings have been confirmed,
this function will be ready for both pieces of
cookware. Confirm the desired hotplate.
– If more than one piece of cookware is moved, the
function will only be ready for the piece of
cookware that was moved last.
– During the adjustment time, you can return the
cookware to the original hotplate. The hotplate then
continues to heat up using the previous setting,
without the need for confirmation.
X|
Y| [|
\|
Z|
X|
Y| [|
\|
Å
Z|