Installing the hob
•
Before connecting the hob, make sure the
electricity is switched off at fuse point!
• Open the lid of the connecting terminal on the
hob. Secure the mains connecting lead as shown
in the connection diagram. Secure the connecting
lead with the pull relief. The mains connecting
cable must at least correspond to the type
H 05 VV-F. Close the lid of the connecting terminal.
• Firmly plug the connecting cable in the hob.
• Guide the cables into the cut-out. Insert the hob
with the display panel front right into the cut-out
and align it.
Note:
do not stick the hob onto the worktop with
silicone.
• Firmly plug the connecting cable in the control
panel.
• Secure the appliance on the worktop with the
clamping screws included. Do not tighten the
clamping screws too tightly, as a uniform sealing
gap should be left all round.
• Connect the appliance to the electricity. Test it for
correct functioning. If the appliance does not work,
check, if the connecting cable between the
control panel and the hob is firmly plugged in.
• Fit the intermediate shelf.
5080009628 en 06.05 EB
17
