Gaggenau CI 292 602, Руководство пользователя

Страница: 41 / 48

Troubleshooting
en-us
41
¡
If a fault occurs, the appliance will not switch to standby
mode.
11.2 Testing cookware suitability
With this function you can check the speed and quality of
the cooking process for individual pieces of cookware.
Requirements
¡
The cookware is cold.
¡
You have read the recommendations for induction cook-
ing
→
Page 9
.
1.
Fill the cookware with approximately 8 oz. (200 ml) of
water.
2.
Place the cookware on the cooking zone that best
matches the base of the cookware. Center the cook-
ware on the cooking zone.
If the diameter of the cooking zone is much smaller than
the diameter of the cookware, only the middle of the
cookware will heat up. This may have a negative effect
on the cooking results.
3.
Touch any control element in the settings range.
a
flashes in the cooking zone display.
a
The result of the test appears in the cooking zone dis-
play after 10 seconds.
→
"Possible Results for Cookware Suitability Test",
Page 41
Note: The flexible cooking zone only counts as a single
cooking zone; place no more than one item of cookware
on it.
Possible Results for Cookware Suitability Test
There are three possible outcomes for the cookware suit-
ability test.
Dis-
pla
y
Meaning
The cookware is not suitable for the cooking zone.
It will not heat up.
If possible, test the cookware again on a smaller
cooking zone.
The cookware takes longer than expected to heat
up. The cooking process is not ideal.
If possible, test the cookware again on a smaller
cooking zone.
The cookware heats up correctly. The cooking
process is good.