Gaggenau CI 282, Руководство пользователя, Страница: 12 / 28

en
Booster for pots
12
a
Once the cooking time has elapsed, the cooking
zone is switched off and a signal tone sounds.
Note:
When you set a cooking time for a cooking zone
in which the Frying Sensor is activated, the cooking
time will not start counting down until the selected tem-
perature level has been reached.
Changing or switching off Switch-off timer
1.
Select the cooking zone and then touch ​⁠.
2.
Use TwistPad to change the cooking time or set it to
​⁠ to delete the cooking time.
11.2 Timer
Enables the activation of a timer of 0–99 minutes. This
function can be used independently of the cooking
zones and other settings. It does not automatically
switch off the cooking zones.
Switching on Timer
1.
Touch ​⁠.
2.
Use the rotary knob to select the required time.
3.
Use ​⁠ to confirm the setting.
a
The time starts to elapse.
a
A signal tone sounds and the displays flash once
the time has elapsed.
Changing or switching off the Timer
1.
Touch ​⁠.
2.
Change the running time using the rotary knob or
set it to
​⁠ to delete the running time.
3.
Press ​⁠ to confirm.
Timer Plus
If you press ​⁠ for a few seconds before the signal tone
ends, the Runtime function is switched on. The display
shows the time that has elapsed since the end of the
programmed time for the Timer function. The time that
was previously set flashes Timer on the function dis-
play.
▶
Press and hold ​⁠ for a few seconds.
a
Runtime stops and the displays go out.
a
The function is switched off.
11.3 Runtime
The stopwatch function displays the time that has
elapsed since activation.
Switching on Runtime
▶
Touch ​⁠.
a
​⁠ light up.
a The time begins to count down.
Switching off Runtime
1. Touch ​⁠.
a
The function stops. The displays continue to light
up.
2.
If you touch ​⁠ again while it is still orange, the time
continues to elapse.
3.
If you press and hold ​⁠, the displays go out.
a The function is deactivated.
12 Booster for pots
You can use this function to heat up large volumes of
water more quickly than with ​⁠.
This function is available for all cooking zones,
provided the other cooking zone in the same group is
not in use.
12.1 Switching on Booster for pots
1.
Select the cooking zone.
2.
Touch ​⁠. The ​⁠ display lights up.
a
The function is switched on.
Note:
You can also switch on this function when cook-
ing with a connected FlexZone.
12.2 Switching off Booster for pots
1.
Select the cooking zone.
2.
Touch ​⁠. The ​⁠ display goes out and the cooking
zone switches back to the ​⁠ power level.
a
The function has been deactivated.
Note:
In certain circumstances, this function may
switch itself off automatically in order to protect the
electronic elements inside the hob.