Gaggenau CI 272, Инструкция по применению

Страница: 17 / 28

Cookware test
en
17
Display Setting Value
​⁠ ​⁠ Power limitation
Enables the total power of the hob to be lim-
ited, if necessary, based on the conditions of
your electrical installation. The available set-
tings depend on the maximum power of the
hob (see rating plate). If the function is active
and the hob has reached the set power limit,
​⁠ is displayed and you cannot select a higher
power level.
​⁠ – Switched off. Maximum power of the hob
1
.
​⁠ - 1000 W. Lowest power setting.
​⁠. ​⁠ - 1500 W.
...
​⁠ - 3000 W. Recommended for 13 A
​⁠. ​⁠ - 3500 W. Recommended for 16 A.
​⁠ - 4000 W.
​⁠. ​⁠ - 4500 W. Recommended for 20 A.
...
​⁠ - Maximum power of the hob.
​⁠ ​⁠ Restoring the factory settings ​⁠ ​⁠ ​⁠ - Individual settings.
1
​⁠ ​⁠ - Factory settings.
​⁠ ​⁠ Wireless cooking sensor
2
Connect the wireless cooking sensor to the
cooking zone.
Select the setting in accordance with the
height about sea level:
​⁠- ​⁠ - Decrease.
​⁠ - Basic setting.
​⁠- ​⁠ - Increase.
​⁠ ​⁠ Professional cooking function Select a single cooking zone in order to preset the
power level for the professional cooking function.
​⁠ ​⁠ Cookware test
You can use this function to test the quality
of the cookware. ​⁠ - Not suitable.
​⁠ - Not optimal.
​⁠ - Suitable.
​⁠ ​⁠ Home Connect → "Overview of the Home Connect settings", Page 19
1 Factory setting
2
The function is not available in this model.
21.2 To go to the basic settings
Requirement:
The hob must be switched off.
1. To switch on the hob, touch ​⁠.
2.
Press ​⁠ within the next 10 seconds.
Product information Display
Directory for the technical after-sales
service (TK) ​⁠ ​⁠
Production number ​⁠ ​⁠
Production number 1 ​⁠ ​⁠.
Production number 2 ​⁠. ​⁠
a
The first four displays provide the product informa-
tion. To call up each individual display, turn the
rotary knob.
3.
Touch ​⁠ to access the basic settings.
a
​⁠ ​⁠ and ​⁠ ​⁠ light up as a presetting.
4.
Touch ​⁠ repeatedly until the desired setting ap-
pears.
5.
Use the rotary knob to change the desired setting.
6.
Touch and hold ​⁠ for 4 seconds.
a
The settings are saved.
21.3 Discarding changes to the basic
settings
▶
Touch ​⁠.
a
All changes are discarded and not saved.
22 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the size of the cookware
base corresponds to the size of the cooking zone be-
ing used.
Access is via the basic settings. →
Page 16
22.1 Carrying out Cookware test
As a single cooking zone, the flexible cooking zone is
set in such a way that only the individual item of cook-
ware is checked.
1.
At room temperature, place the cookware with ap-
prox. 200 ml water in the centre of the cooking zone
that best fits the base of the cookware in terms of
size.
2.
Call up the basic settings and select ​⁠ ​⁠ ​⁠.
3.
Turn the rotary knob. ​⁠ flashes in the cooking
zones.
a
The function is switched on.
a
After 10 seconds, the result appears in the cooking
zone displays.