Home Connect
en
19
24.2 Overview of the Home Connect settings
You can adjust the settings and network settings for Home Connect by going to your hob's basic settings.
Setting
Selection or display
Additional information
/
Network connection
– Not connected/disconnect net-
work
– Connect automatically
– Connect manually
– Connected
Log on the hob in the Wi-Fi home network (Wi-Fi) or dis-
connect from the network.
/
Connection to app
– Not connected
– Connect
/ is only displayed if the hob is connected to the
home network.
/
Connection to the Wi-Fi
– Wireless module switched off
– Wireless module switched on
If Wi-Fi has been activated, you can use the Home Con-
nect functions.
/ is only displayed if the hob has been previ-
ously connected to a network.
/
Set using the app
– Switched off
– Switched on
1
If the setting is switched off, only the hob's operating
statuses are displayed in the Home Connect app.
/
Software update
– Update available and ready to
install
– Start installation
/ is only displayed if a software update is avail-
able.
/
Controlling remote access by after-
sales service
– Not authorised
– Authorised
/ is only displayed if after-sales service is at-
tempting to connect to the hob. After granting access,
you can terminate this at any time.
/
Display Wi-Fi signal strength
– Not connected to the WLAN
home network (Wi-Fi)
– Signal strength 1 (poor)
– Signal strength 2 (moderate)
– Signal strength 3 (good)
/ is only displayed if there is a connection to the
WLAN home network (Wi-Fi).
/
Connection to Home Connect server
– Not connected
– Connected
/ is only displayed if there is a connection to the
WLAN home network (Wi-Fi).
1
Factory setting
24.3 Changing settings via the
Home Connect app
You can use the Home Connect app to change the set-
tings for the cooking zones and send them to the hob.
Requirements
¡
The hob is connected to the Wi-Fi and to the
Home Connect app.
¡
To use the Home Connect app to set the hob,
must be switched on in the basic settings. is
switched on on delivery. If the option for the trans-
mission of settings has been deactivated, only the
hob's operating statuses are displayed in the
Home Connect app.
1.
Select the setting in the Home Connect app and
send it to the hob.
Follow the instructions in the Home Connect app.
Settings that you send from the Home Connect app
to the hob must be confirmed on the hob.
a
As soon as cooking settings are transmitted to a
cooking zone, the cooking zone display starts to
flash, depending on the setting.
2.
To confirm the setting, touch the flashing symbol .
3.
To discard the setting, touch any other touch field
on the hob.
24.4 Software update
Your appliance's software can be updated using the
software update function, e.g. for the purposes of op-
timisation, troubleshooting or security updates.
To do this, you must be a registered Home Con-
nect user, have installed the app on your mobile device
and be connected to the Home Connect server.
As soon as a software update is available, you will be
informed via the Home Connect app and will be able to
start the software update via the app. Once the update
has been successfully downloaded, you can start in-
stalling it via the Home Connect app if you are in your
WLAN home network (Wi-Fi). The Home Connect app
will inform you once installation is successful.
Notes
¡
You can continue to use your appliance as normal
while updates are downloading. Depending on your
personal settings in the app, software updates can
also be set to download automatically.
Содержание CI 272
Страница 1: ...en Information for Use CI 272 CI 262 Induction hob Gaggenau ...
Страница 26: ......
Страница 27: ......