Gaggenau CE 492-610, Инструкция по использованию и уходу

Страница: 16 / 28

16
!
WARNING – NEVER LEAVE THE COOKTOP
UNATTENDED WHEN IN USE. BOILOVERS
CAUSE SMOKING AND GREASY SPILL-
OVERS MAY IGNITE.
With the timer you can program an automatic
switch-off time between 1 and 90 minutes in
1-minute-steps for a cooking zone (automatic
switch-off). You can set a time value for every
cooking zone.
Setting an Automatic Switch-off Time
The cooktop must be switched on by the main
switch.
1 Select the cooking zone with the twist knob.
2 Touch the
W
symbol. 00 flashes in the timer
display. Use the twist knob to set the required
duration. The duration flashes for several
seconds and then begins to count down. If you
have set a duration for several cooking zones, it
is always the shortest duration that is
displayed.
If you would like to call up the remaining duration
for a cooking zone: Use the twist knob to select the
cooking zone. The duration is displayed for
5 seconds.
When the duration has elapsed, the cooking zone
switches off.
0 lights up in the cooking zone
display. A signal sounds for three minutes.
00 flashes in the timer display. Touch any control
panel. The displays will go out and the audible
signal will stop.
Changing a Time Value
Select the cooking zone with the twist knob. Touch
the
W
symbol. Use the twist knob to change the
duration.
Clearing a Time Value
Select the cooking zone with the twist knob. Touch
the
W
symbol. Use the twist knob to set the duration
to 00 . The display goes out after a few seconds.
The cooking zone continues heating at the selected
level.
Timer