Gaggenau BSP2601 1 Series, Руководство пользователя и инструкции по установке

Страница: 18 / 60

en
Individual recipes
18
12 Individual recipes
You have the option to save up to 50 individual recipes
with a name so that, if required, you can access the re-
cipe quickly and easily. You can record a recipe.
12.1 Recording a recipe
It is possible to set and record up to 5 phases consec-
utively.
1.
Turn the function selector to ​⁠.
2.
Press ​⁠.
3.
Use the rotary selector to select "Individual recipes".
4.
Press ​⁠ to confirm.
5.
Use the rotary selector to select a free memory loc-
ation.
6.
Press ​⁠.
7.
Use the rotary selector to set the desired temperat-
ure.
a
The appliance records the cooking time.
8.
To record another phase, set the function selector
to the required type of heating and use the rotary
selector to set the required temperature.
a A new phase starts.
9.
When the dish has reached the required cooking
result, press ​⁠.
10.
Enter the name under "ABC".
→
"Entering a name", Page 18
The appliance only starts recording a phase once it
has reached the set temperature.
Each phase must last at least one minute.
During the first minute of a phase, you can change
the type of heating or the temperature.
Entering the core temperature for a phase
1.
Insert the core temperature probe → Page 19 into
the socket in the cooking compartment.
2.
Set the type of heating and the temperature.
3.
Press ​⁠.
4.
Use the rotary selector to set the desired core tem-
perature and press
​⁠ to confirm.
12.2 Programming a recipe
1. Turn the function selector to ​⁠.
2.
Press ​⁠.
3. Use the rotary selector to select "Individual recipes"
and press ​⁠ to confirm.
4. Use the rotary selector to select a free memory loc-
ation.
5. Press ​⁠.
6.
Enter the name under "ABC".
→
"Entering a name", Page 18
7.
Use ​⁠ to select the first phase.
a
The display shows the type of heating and temperat-
ure that are selected at the start.
8.
If required, use the rotary selector to change the
type of heating and the temperature.
9.
Use ​⁠ to select the time setting.
10.
Use the rotary selector to set the required cooking
time.
11.
If the preparation is complete, use ​⁠ to finish mak-
ing entries or use ​⁠ to select the next phase.
12.
Use ​⁠ to save or ​⁠ to cancel, and exit the menu.
Entering the core temperature for a phase
Note:
You cannot enter the cooking time for phases
with a programmed core temperature.
1.
Press ​⁠ to select the next phase.
2.
Set the type of heating and the temperature.
3.
Press ​⁠.
4.
Use the rotary selector to set the desired core tem-
perature and press
​⁠ to confirm.
12.3 Entering a name
1.
Enter a name for the recipe under "ABC".
2.
Use the rotary selector to select the letters.
A new word always begins with a capital letter.
Latin characters, certain special characters and
numbers are available.
3.
Briefly press ​⁠ to position the cursor to the right.
4.
Press and hold ​⁠ to switch to umlauts and spe-
cial characters.
5.
Press ​⁠ twice to insert a break.
6.
Briefly press ​⁠ to position the cursor to the right.
7.
Press and hold ​⁠ to switch to normal characters.
8.
Press ​⁠ twice to insert a break.
9.
Press ​⁠ to delete a letter.
10.
Use ​⁠ to save or ​⁠ to cancel, and exit the menu.
12.4 Starting a recipe
1.
Turn the function selector to ​⁠.
2. Press ​⁠.
3.
Use the rotary selector to select "Individual recipes"
and press ​⁠ to confirm.
4.
Use the rotary selector to select the desired recipe.
5. If the recipe contains a saved core temperature, in-
sert the core temperature probe →
Page 19 .
6.
Press ​⁠ to start.
The cooking time does not start counting down until
the appliance has reached the set temperature.
You can use the rotary selector to change the tem-
perature while the recipe is in progress. Changing
the temperature does not change the saved recipe.
a
The operation begins.
a
You can see the cooking time counting down.
a
The display shows the settings for the phases on
the display bar.
12.5 Changing a recipe
You can change the settings for a recorded or pro-
grammed recipe.
1.
Turn the function selector to ​⁠.
2.
Press ​⁠.
3.
Use the rotary selector to select "Individual recipes"
and press ​⁠ to confirm.
4.
Use the rotary selector to select the desired recipe.
5.
Press ​⁠.
6.
Use ​⁠ to select the required phase.
a The display shows the programmed type of heating,
temperature and cooking time.
7. If required, you can use the rotary selector or func-
tion selector to change the settings.
8. Use ​⁠ to save or ​⁠ to cancel, and exit the menu.