Gaggenau BO 250, Инструкция по использованию и уходу

Страница: 38 / 40

38
Power Cut
The appliance bridges a power cut of up to
5 minutes. The operation continues.
After a longer power cut the appliance will switch
off the operation. The
J
symbol appears on the
display and three dashes instead of the
temperature.
Switch off the temperature knob and switch the
appliance back on.
The “first settings” menu reappears if the appliance
is without electricity for several days. You have to
set the clock.
Note: The basic settings remain stored even if the
appliance is without electricity for several days.
If an oven light fails, it must be replaced. Heat-
resistant replacement bulbs can be obtained from
the after-sales service or specialist shops. Only use
these bulbs.
!
WARNING: Make sure the appliance and lights
are cool and power to the appliance has been
turned off before replacing the light bulb(s). Failure
to do so could result in electrical shock or burns.
The lenses must be in place when using the
appliance. The lenses serve to protect the light bulb
from breaking.
The lenses are made of glass. Handle carefully to
avoid breaking. Broken glass could cause an injury.
Light socket is live when door is open.
Replacing the Ceiling Light
1 Loosen the screw on the lamp cover.
Tilt down the lamp cover.
2 Pull out the bulb. Push the new bulb in firmly.
Make sure that the pins are in the correct
position.
Note: Only use a heat-resistant halogen bulb of
the same type (60 W / 230 V / G9).
Do not touch the halogen lamp with your hands.
Use a dry cloth.
3 Tilt the lamp cover up and screw it back on.
4 Switch the circuit breaker back on.
13:30
Replacing the Oven Lights