Gaggenau BMP 224/225, Инструкция по эксплуатации

Страница: 26 / 36

26
--------
Power cut
Your appliance can bridge a power cut of a few
seconds. Operation continues.
If the power cut was for a longer period and the
appliance was in operation, a message appears in the
display. Operation is interrupted.
Set the function selector to 0 , then the appliance can be
operated again as usual.
Demo mode
The
°
symbol appears on the display when the
appliance is in demo mode. The appliance will not heat
up.
Briefly disconnect the appliance from the mains (switch
off the household fuse or the circuit breaker in the fuse
box). Then deactivate demo mode in the basic settings
within 3 minutes (see section entitled 'Basic settings').
Technical data
This appliance corresponds to the standards EN 55011
and CISPR 11. It is a Group 2, Class B product.
Group 2 means that microwaves are produced for the
purpose of heating food. Class B states that the
appliance is suitable for private households.
After ­ sales service
Our after-sales service is there for you if your appliance
needs to be repaired. We will always find an appropriate
solution, also in order to avoid after-sales personnel
having to make unnecessary visits.
E number and FD number
When calling us, please give the full product number (E
no.) and the production number (FD no.) so that we can
provide you with the correct advice. The rating plate
bearing these numbers can be found when you open the
appliance door.
To save time, you can make a note of the number of your
appliance and the telephone number of the after-sales
service in the space below, should it be required.
Please note that a visit from an after-sales service
engineer is not free of charge, even during the warranty
period.
Please find the contact data of all countries in the
enclosed customer service list.
The interior lighting does not work Interior light faulty Call the after-sales service
Error message "Exxx" If an error message is displayed, turn the
function selector to
0 ; if the display goes out,
there was a non-recurring problem. If the
error occurs repeatedly or the display
remains on, please contact the after-sales
service and inform them of the error code.
Power supply 220-240 V, 50/60 Hz
Maximum total connected load 1990 W
Microwave output setting 900 W (IEC 60705)
Max. grill output power 1300 W
Microwave frequency 2450 MHz
Fuse 10 A
Dimensions (H/W/D)
­ appliance 382 x 590 x 321 mm
­ cooking compartment 220 x 350 x 270 mm
VDE approved yes
CE mark yes
=1U )' (1U
7\SH
E no. FD no.
After-sales service
O