20
Connecting the pipes
Note:
If an aluminum pipe is used, smooth the
connection area beforehand.
Exhaust-air pipe Ø 150 mm (recommended size)
Attach exhaust-air pipe directly to the air-pipe
connector and seal.
Exhaust-air pipe Ø 120 mm
1
Attach reducing connector directly to the air-pipe
connector.
2
Attach exhaust air pipe to the reducing connector.
3
Seal both joints appropriately.
Attaching flue duct
9
WARNING
Risk of injury
From sharp edges during installation. Always
wear protective gloves while installing the
appliance.
1
Separate the flue ducts.
To do this, remove the adhesive tape.
2
Remove the protective foil from both sides.
3
Place both parts of the upper flue on the
appliance and push together.
Note:
The slots of the upper flue must point
downwards.
4
Push up the upper flue part and secure with
2 screws.
5
Insert both lower parts of the flue and push
together.
Removing the appliance
1
Loosen the flue duct.
2
Disconnect the appliance from the power supply.
3
Loosen the exhaust air lines.
4
Loosen screws for fastening the appliance.
5
Remove the appliance.
