en
Preparing the units
12
Preparing the units
1.
Install the tilt protection. Ensure that the screws are
mounted in the upper part of the elongated holes.
2.
Use the installation aid to secure the mounting
bracket to the unit.
Installing the appliance
WARNING ‒ Risk of electric shock!
If the insulation of the power cord is damaged, this is
dangerous.
▶
Never let the power cord come into contact with hot
appliance parts or heat sources.
▶
Never let the power cord come into contact with
sharp points or edges.
▶
Never kink, crush or modify the power cord.
WARNING ‒ Risk of injury!
After removing the transport lock, the drawer may open
suddenly during transport.
▶
Transport the appliance in such a way that the
drawer does not accidentally open.
1.
Insert the power cord into a protective contact
socket.
2.
WARNING ‒ Risk of injury!
The high weight of
the appliance may result in injury when lifted.
▶
Do not lift the appliance on your own.
Slide the appliance into the unit.
3.
If the appliance cannot slide in, adjust the height of
the tilt protection brackets. To do this, undo the
screws and push the tilt protection brackets up-
wards.
4.
Centre the appliance.
5.
To check the tilt protection, open the drawer care-
fully.
6.
Select appropriate decorative panels.
