GAGEMAKER MIC TRAC MT-3000, Руководство по эксплуатации, Страница: 17 / 32

M
M
I
I
C
C
T
T
R
R
A
A
C
C
M
M
T
T
-
-
3
3
0
0
0
0
0
0
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
M
M
a
a
n
n
u
u
a
a
l
l
15
Mounting the Flat Face Anvils (TF-1F Blocks)
Materials Needed:
•
MIC TRAC MT-3000 base unit
•
Flat face anvils (TF-1F Blocks)
•
5/32" hex wrench
•
4 ea #10-32 socket head cap screws w/
washers
•
50 in/lb torque wrench
•
ZEP I.D. Red Cleaner
•
Lint-free cloth
The flat face anvils are mounted on the receiver pads of the MT-3000 to provide a measuring surface. To
ensure a precise surface for measuring, the anvil ends are lapped parallel.
1. Clean both of the receiver pads and the
mounting surfaces of the flat face anvils using
the lint free cloth and ZEP I.D. Red cleaner.
2. Place the shoulder side of the left anvil against
the receiver pad shoulder and insert the cap
screws. “Wring In” the anvil by sliding it back
and forth with pressure towards the shoulder.
3. Hold the anvil against the receiver pad
shoulder and use a 5/32" hex wrench to tighten
the screws.
4. Then use a 50 in/lb torque wrench to secure
the cap screws.
5. Repeat the same process with the right flat
face anvil.
6. Alignment and parallelism may be verified by
measuring a precision contact ball at various
locations about the face of the anvil.