Gage CompuScope 14100C, Руководство по аппаратному обеспечению и инструкция по установке драйверов

Страница: 170 / 174

164 CompuScope 3200C
CompuScope 3200C digital input
The CompuScope 3200C is available with two different input configurations:
•
Single-Ended, TTL/CMOS Inputs
•
Differential, ECL/PECL Inputs
Users must specify one or the other at the time of placing an order. The two configurations cannot be changed
via software commands and require considerable changes to the input circuitry. As such, this change cannot be
made in the field and must be done at the factory.
Pin layout on CS3200C connector – Single-ended, TTL/CMOS inputs
CS3200C connector pin layout (Single-ended, TTL/CMOS inputs)
1 CLK 35 GND
2 D0 36 GND
3 D1 37 GND
4 D2 38 GND
5 D3 39 GND
6 D4 40 GND
7 D5 41 GND
8 D6 42 GND
9 D7 43 GND
10 D8 44 GND
11 D9 45 GND
12 D10 46 GND
13 D11 47 GND
14 D12 48 GND
15 D13 49 GND
16 D14 50 GND
17 D15 51 GND
18 D16 52 GND
19 D17 53 GND
20 D18 54 GND
21 D19 55 GND
22 D20 56 GND
23 D21 57 GND
24 D22 58 GND
25 D23 59 GND
26 D24 60 GND
27 D25 61 GND
28 D26 62 GND
29 D27 63 GND
30 D28 64 GND
31 D29 65 GND
32 D30 66 GND
33 D31 67 GND
34 TRIG IN 68 GND