Gage Bilt GB784, Оригинальное руководство пользователя

Страница: 7 / 24

7 Rev. 2/17
GB784
Image may not reflect actual tool
PRINCIPLE OF OPERATION
When the actuator lever assy is depressed, the pressurized air inside of the tool is released allowing spring pressure to move the
valve spool assy causing the air to be redirected. The air is directed to the top of the air piston assy, moving it in a downward
direction. The air below the air piston assy is then directed through the valve sleeve and exhausted out of the bottom of the tool.
Simultaneously, the piston rod assy, connected to the air piston assy, is also moving down, forcing hydraulic oil up and into the
front side of the head cylinder assy, causing the piston to move to the rear of the head cylinder assy. The internal components of the
attached nose assembly are also moving with the piston to start the fastener installation. When the fastener installation is completed
the actuator lever assy is released. Air pressure is then built up inside of the handle assy causing the valve spool assy to return to
its original position and reversing the sequence. Spring pressure then returns the head piston to the forward position.
RETURN Cycle
Piston Travel
Air Piston
moves up
Piston Rod Assy
moves up
Air exhaust
Pressurized Oil
Return Oil
Pressurized Air
Exhaust Air
Air exhaust
Piston Rod Assy
moves down
Air Piston
moves down
PULL Cycle
Piston Travel