9
REV. 2/14
HEAD
Remove nose assembly from tool before attempting disassembly of head assembly.
Remove end cap (752313). Push against threaded end of piston (752507) to slide it out of head cylinder ass’y (752124). Be careful
not to damage threads or cause burrs on polished piston rod ass’y surface.
WARNING:
DISPOSE OF HYDRAULIC FLUID IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the
four socket-head cap screws (400061 & 400066) uniformly to 40 inch lbs. to prevent leakage around the gasket.
403764 - O'RING
401080 - BACK-UP RING
204304 - SWIVEL ASSEMBLY
A-663 - HANGER
703563 - HOSE GUARD (NOT SHOWN)
402482 - B.H.C.S.
S572 - STAT-O-SEAL
S572 - STAT-O-SEAL (2)
402482
BUTTON HEAD
CAP SCREW (2)
744303 - MANIFOLD-HANDLE
S1181 - BARBED FITTING (2)
A-144 - HOSE CLAMP (2)
704305 - AIR LINE
204304 - SWIVEL ASSEMBLY
(INCLUDES 401080 & 403764)
400061
SOCKET HEAD
CAP SCREW (2)
400066
SOCKET HEAD
CAP SCREW (2)
724017 LEVER
ASSEMBLY
A-336
HYDRAULIC HOSE
744306
MANIFOLD-HEAD
ASSEMBLY
704129 - GASKET
S832 - O'RING
704130
AIR ACTUATOR
ASSY
(O'RING IN POLSYSEAL
MUST FACE IN
THIS DIRECTION)
S834 - O'RING
S834 - O'RING
200506-2 - PINTAIL TUBE
(FOR USE WITH BLIND RIVETS SMALL THAN 3/16" Ø)
752507 - PISTON
400791 - O'RING
S829 - O'RING
752313 - END CAP
752122
DEFLECTOR
240102
RETAINING NUT STOP
211102 - NUT
752301
NOSE FITTING
401089
BACK-UP RING
A-1134
POLYSEAL
401816 PLUG
400793
O'RING
752124 HEAD
CYLINDER
ASSEMBLY
