4
REV 4/23
GB752SHVT INSTALLATION TOOL SN# 1002 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
SPECIFICATIONS
Hand Held Weight
-
2.50 lbs. (1.13 kg)
Air pressure req'd
-
90
-
100 psi. (6.2
-
6.9 bar)
Air consumption
-
.30 SCF/cycle (8.50 L/cycle)
Hydraulic oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.500" (12.7 mm)
Noise level
-
Less than 81.5 dB(A)
Rated pull load
-
3,800 lbs. (16.9 kN)
Vibration
-
Tested –
No Hazards Found.
The GB752SHVT is a pneumatic
-
hydraulic installation tool designed specifically for the efficient installation of blind rivets and lockbolts.
This tool
’
s unique
“
split
”
system provides the operator with a lightweight ergonomic tool. The handle assembly and head cylinder
assembly when held in hand weighs 2.50 lbs. (1.13 kg). The entire split handle installation tool weighs 7.50 lbs. (3.40 kg). It has a
.500” (12.7
mm)
fastener setting stroke.
The GB752SHVT split handle installation tool operates on 90 to 100 psi. (6.2
-
6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing maximum
efficiency. At 90 psi. (6.2 bar) of air pressure, the GB752SHVT does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The GB752SHVT comes with 8 feet (2.4 m) of hose and a vacuum system for fod control. The air inlet is provided with 1/4
-
18 female
pipe thread to accept the users air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH THIS TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection
chart on pg. 20).
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB752SHVT can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
