4
REV. 5/22
GB743SRV S/N: 1063 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
SPECIFICATIONS
Hand Held Weight
-
2.25 lbs. (.80 Kg)
Air pressure req'd
-
90
-
100 p.s.i. (6.2
-
6.9 bar) Max.
Air consumption
-
.30 SCF/cycle (8.50 L/cycle)
Hydraulic oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.900" (22.86 mm)
Rated pull load
-
4,000 lbs. (17.8 kN)
Noise level
-
No noise hazards identified.
Vibration
-
Tested
-
No hazards found
The GB743SRV is a pneumatic
-
hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets.
This tool
’
s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in
hand weighs 2.25 lbs. (.80 kg). The entire split handle installation tool weighs 7 1/4 lbs. (3.29 kg). It has a
.900” (22.86
mm) fastener
setting stroke.
The GB743SRV split handle installation tool operates on 90 to 100 psi. (6.2
-
6.9 bar) of air pressure, with 90 psi (6.2 bar) providing maximum
efficiency. At 90 psi (6.20 bar) of air pressure, the GB743SRV does not exceed 85 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The GB743SRV comes with 3 feet (.91 m) of hose and a vacuum system, please consult our engineering department for specific applications.
The air inlet has a 1/4
-
18 female pipe thread for accepting the user's air hose fitting.
UNLESS ORDERED FASTENER SPECIFIC (I.E. GB743SRV/5N), THE STANDARD GB743SRV IS FURNISHED WITH NOSE ASSEMBLY
8N
-
743
-
24SRV AND A SPARE NOSE TIP (10204) TO CONVERT TO A 6N
-
743
-
24SRV. ALL OTHER NOSE TIPS MUST BE ORDERED
SEPARATELY. WHEN ORDERING TOOL FASTENER SPECIFIC, PLEASE CONTACT GAGE BILT FOR MORE INFORMATION.
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB743SRV can be operated between 0ºF —
118ºF (
-
17.8ºC / 47.8ºC)