4
5/18 REV 12/22
GB743SHVT5 INSTALLATION TOOL: S/N: 1008 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
SPECIFICATIONS
Hand Held Weight
-
1.75 lbs. (.80 kg)
Air pressure req'd
-
90
-
100 p.s.i. (6.2
-
6.9 bar)
Air consumption
-
.30 SCF/cycle (8.50 L/cycle)
Hydraulic Oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.900" (22.86 mm)
Rated pull load
-
4,000 lbs. (17.80 kN)
Noise level
-
81.5 dB (A)
Vibration
-
Tested–
No Hazards Found
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB743SHVT5 can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
The GB743SHVT5 is a pneumatic
-
hydraulic split handle installation tool designed specifically for the efficient installation of blind
rivets. This tool
’
s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when
held in hand weighs 1.75 lbs. (.80 kg). The entire split handle installation tool weighs 7.25 lbs. (3.29kg). It has a
.900” (22.86
mm)
fastener setting stroke.
The GB743SHVT5 split handle installation tool operates on 90 to 100 psi. (6.2
-
6.9 bar) of air pressure, with 90 psi (6.2 bar) providing
maximum efficiency. At 90 psi (6.2 bar), the GB743SHVT5 does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The GB743SHVT5 comes with 5 feet (1.5 m) of hose and a vacuum system, please consult our engineering department for specific
applications.
The air inlet has a 1/4
-
18 female pipe thread for accepting the user's air hose fitting.
THE GB743SHVT5 IS SOLD FASTENER SPECIFIC. (SEE NOSE ASSEMBLY SELECTION CHART ON PAGE 21 TO PULL ANY FASTENERS
OTHER THAN WHAT TOOL WAS PURCHASED FOR).