4
REV 3/23
GB743SH
-
5 INSTALLATION TOOL
S/N: 1016 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS
SPECIFICATIONS
Hand Held Weight
-
2.25 lbs. (1.02 kg)
Air pressure req'd
-
90
-
100 p.s.i. (6.2
-
6.9 bar)
Air consumption
-
.30 SCF/cycle (8.50 L/cycle)
Hydraulic Oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.900" (22.86 mm)
Rated pull load
-
4,200 lbs. (18.68 kN)
Noise level
-
Less than 81.5 dB(A)
Vibration
-
Tested
-
No Hazards Found
DESCRIPTION
WARNING
:
Any other use is forbidden.
The GB743SH
-
5 is a pneumatic
-
hydraulic split handle installation tool designed specifically for the efficient installation of blind fasteners.
This tool
’
s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in
hand weighs 2.25 lbs. (1.02 kg). The entire split handle installation tool weighs 7.25 lbs. (3.29kg). It has a
.900” (22.86
mm) fastener setting stroke.
The GB743SH
-
5 split handle installation tool operates on 90 to 100 psi. (6.2
-
6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing maximum
efficiency. At 90 psi. (6.2 bar) of air pressure, the GB743SH
-
5 does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The GB743SH
-
5 comes with 5 feet (1.5 M) of hose. Vacuum systems are available for this tool, please consult our engineering department
for specific applications.
The air inlet has a 1/4
-
18 female pipe thread for accepting the user's air hose fitting.
UNLESS ORDERED FASTENER SPECIFIC (I.E. GB743SH/8N), THE STANDARD GB743SH IS FURNISHED WITH NOSE ASSEMBLY 8N
-
743
-
24
AND A SPARE NOSE TIP 10204 TO CONVERT TO A 6N
-
743
-
24. ALL OTHER NOSE TIPS MUST BE ORDERED SEPARATELY. WHEN ORDERING
TOOL FASTENER SPECIFIC, PLEASE CONTACT GAGE BILT FOR MORE INFORMATION. SEE CHART ON PAGE 20 FOR PART NUMBERS.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB743SH
-
5 can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
