3/12 REV 9/14
8
HEAD
WARNING:
Dispose of Hydraulic Oil in accordance with applicable regulations.
Remove nose assy from tool before attempting disassembly of head cylinder assy.
Remove end cap (734111-1). Push against threaded end of piston (734107) to slide it out of head cylinder assy (734104). Be careful not
to damage threads or cause burrs on polished piston (734107) surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the
four socket-head cap screws (400061) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
403764 - O'RING
401080 - BACK-UP RING
204304 - SWIVEL ASSEMBLY
S1181 - BARBED FITTING
A-144 - HOSE CLAMP
204304 - SWIVEL ASSY
(INCLUDES 401080 & 403764)
704311 - AIR LINE
A-317 - HYDRAULIC HOSE
A-144 - HOSE CLAMP
S1181 - BARBED FITTING
744303 - MANIFOLD - HANDLE
402482 - BUTT0N HEAD SOCKET SCREW
S572 - STAT-O-SEAL
704130 - AIR ACTUATOR ASSY
704312
ACTUATOR LEVER ASSY
400061 - SOCKET HEAD CAP SCREW
700323 - HANDLE-SPLIT
S832 - O'RING
S572 - STAT-O-SEAL
402482 - BUTT0N HEAD SOCKET SCREW
704129 - GASKET
A-663 - HANGER
703560 - HOSE GUARD (NOT SHOWN)
402482 - BUTTON HEAD
CAP SCREW
734104 - HEAD CYLINDER ASSY
S572 - STAT-O-SEAL
400790 - O'RING
401816 - PLUG
734107 - PISTON
401089 - BACK-UP RING
S834 - O'RING
A-289 - O'RING
401112 - BACK-UP RING
S829 - O'RING
734111-1 - END CAP
S834 - O'RING
