4
10/12 Rev 4/23
GB703SHV S/N: 1405 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
SPECIFICATIONS
Hand Held Weight
-
2.5 lbs. (1.1 kg)
Air pressure req'd
-
90
-
100 psi. (6.2
-
6.9 bar)
Air consumption
-
.30 SCF/cycle (8.50 L/cycle)
Hydraulic oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.780" (19.8 mm)
Noise level
-
Less than 81.5 dB(A)
Rated pull load
-
2,200 lbs. (9.79 kN)
Vibration
-
less than 2.5 M/S
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB703SHV can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
The GB703SHV is a pneumatic
-
hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets.
This tool
’
s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held
in hand weighs 2.5 lbs. (1.1 kg). The entire split handle installation tool weighs 7.25 lbs. (3.29 kg). It has a
.780” (19.8
mm) fastener
setting stroke.
The GB703SHV split handle installation tool operates on 90 to 100 psi. (6.2
-
6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing
maximum efficiency.
The GB703SHV comes with 8 feet (2.4 m) of hose. Hoses can be attached in the top rear or the bottom of the split handle depending
on the application.
The air inlet is provided with 1/4
-
18 female pipe thread for accepting the user's air hose fitting.
UNLESS ORDERED FASTENER SPECIFIC (I.E. GB703SHV/3N), THE STANDARD GB703SHV IS FURNISHED WITH NOSE ASSEMBLY
6N
-
703
-
18V AND A SPARE NOSE TIP (10202) AND FOLLOWER ASSEMBLY (703421) TO CONVERT TO A 4N
-
703
-
18V. ALL OTHER
NOSE TIPS MUST BE ORDERED SEPARATELY. WHEN ORDERING TOOL FASTENER SPECIFIC, PLEASE CONTACT GAGE BILT FOR
MORE INFORMATION. SEE NOSE ASSEMBLY SELECTION CHART ON PAGE 20 FOR PART NUMBERS.
