4
Rev. 6/22
GB574/GB574A Installation Tool
SPECIFICATIONS
Weight
-
3 lbs. (1.36 kg)
Hyd. Pressure Req'd.
-
6,000 psi (414.0 bar) MAX. PULL (Tool spring RETURN)
Hyd. Power Source
-
GB910, GB912 or GB940
Powerunit or equivalent.
Hydraulic Oil
-
See hydraulic pump instructions.
See powerunit for hydraulic oil specifications.
Setting Stroke
-
up to .300" (7.6 mm)
Rated Pull Load
-
12,428 lbs. (55.3 kN)
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB574 & GB574(A) can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
DESCRIPTION
WARNING
:
Any other use is forbidden.
The GB574 and the GB574(A) are hydraulic installation tools designed specifically for the efficient installation of HUCKRIMP® (krimpnuts)
with a crimping action that deforms the nut to provide accurate installation loads. They weigh just over 3 lbs. (1.36kg) and can be operated
in any position. They have up to a
.300” (7.6
mm) fastener setting stroke and a rated pull load of 12,428 lbs. (55.3 kN).
The GB574 installation tool operates on hydraulic pressure developed by a Powerunit set at 6,000 psi. (414.0 bar) maximum PULL
pressure. The tool comes equipped with a 12 feet (3.65 m) of hydraulic hose with quick disconnects and a electric control cord assembly.
The GB574(A) installation tool operates on hydraulic pressure developed by a Powerunit set at 6,000 psi. (414.0 bar) maximum PULL
pressure. The tool comes equipped with a 12 feet (3.65 m) of hydraulic hose with quick disconnects and an air line assembly.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH THE TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection
chart on pg. 14).
