7
Rev. 1/23
GB55B S/N: 1014 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
When the actuator assembly (1) (510127) is depressed, the pressurized air inside the tool is directed to the front side of the piston
(3) (510101) thus moving it to the rear of the cylinder assembly (2) (510121), forcing the air from the back side of the piston (3)
(510101) to be exhausted from the side of tool. The internal components of the attached nose assembly are also simultaneously
moving with the piston (3) (510101) to start the fastener installation. When the fastener installation is completed, the actuator
assembly (1) (510127) is released directing the air to the back side of the piston (3) (510101) reversing the sequence.
Air exhaust
Air exhaust
Piston in forward position
Piston in rear position
1
2
3
1
2
3
Air is exhausted through
Standard Exhaust Port
on side of tool.
Rear Exhaust Port
Plugged
Rear Exhaust Port Plug
removed. Side port plugged.
Air is exhausted through
Rear Exhaust Port
STANDARD
EXHAUST
(Side of tool)
OPTIONAL
EXHAUST
(Rear of tool)
Air is exhausted through the standard exhaust port on the side of the tool. To redirect air exhaust to rear of tool, remove plug (401816)
from rear exhaust hole. If changing exhaust back to side, we recommend applying Vibra
-
tite® to plug (401816) before installation.
PRINCIPLE OF OPERATION
AIR EXHAUST
Images may not reflect actual tool
