4
Rev. 4/22
GB2581 S/N: 1068 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
SPECIFICATIONS
Weight
-
6 lbs. 10 oz. (3.0 kg)
Hyd. pressure req'd
-
7,400 psi (510.2 bar) PULL
3,200 psi (220.6 bar) MAX RETURN
Hyd. Power Source
-
GB940 or GB910/GB912 Powerunit or equivalent
Hydraulic Oil
-
See power unit for hydraulic oil specifications
Setting stroke
-
1.000” (25.4 mm)
Rated pull load
-
10,700 lbs. (47.59 kN) @ 7,400 psi (510.2 bar)
Noise level
-
81.5 dB(A)
Vibration
-
Tested– No hazards found.
DESCRIPTION
WARNING
:
Any other use is forbidden.
The GB2581 and GB2581(A) can be operated between 0ºF - 118ºF (17.8ºC - 47.8ºC)
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB2581 & GB2581A are hydraulic installation tools designed specifically for the efficient installation of blind, lockbolt and Magna-Grip®
fasteners thru 3/8" diameter. It weighs 6.6 lbs. (2.99 kg) and can be operated in any position. It has a 1.000" (25.4 mm) fastener setting
stroke and a rated pull load of 10,700 lbs. (47.59 kN) @ 7,400 psi. (510.2 bar).
The GB2581 (electric actuated) installation tool operates on hydraulic pressure developed by the GB940 power unit set at 7,400 psi. (510.2 bar)
maximum PULL pressure and 3,200 psi (220.6 bar) maximum RETURN pressure. The tool comes equipped with 12 ft. (3.66 m) hoses
and electric cord kit complete with quick disconnects.
The GB2581(A) (air actuated) installation tool operates on hydraulic pressure developed by the GB910 & GB912 Power units set at
7,400 psi (510.2 bar) maximum PULL pressure and 3,200 psi (220.6 bar) maximum RETURN pressure. The tool comes equipped with
12 ft. (3.66 m) of hydraulic hoses, couplings, air actuator and tubing.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH THE INSTALLATION TOOL AND MUST BE ORDERED SEPARATELY.
(See nose
assembly selection chart on pg. 16).
