manualshive.com logo in svg

GAF Flynn, Инструкция пользователя

Поделиться
Скачать
GAF Flynn Скачать руководство пользователя страница 14

 

 

 

 

 

INSTALLING GENERAL TURTLE LIGHT KIT (OPTIONAL) 

1.  Locate two wires in the switch housing (white and blue labeled “ for light”). 

2.  Connect them to the light kit wire connectors (Fig. 12) 

  White to white 

  Blue to blue 

Secure all splices with electrical tape to prevent connectors from vibrating loose 

during fan operation. 

3.  Carefully push all wires back into the switch housing. Then attach housing 

cover plate to switch housing with the 3 screws provided. 

4.  Attach the glass shades to the light kit, using 3 thumbscrews per shade 

(provided). Do not over-tighten the thumbscrews as glass may break. Install 

(60 watt max). Light bulbs (not provided). Glass shade & thumb screws are 

not provided on the spot light fan. 

5.  Restore power and your light kit is ready for operation. 

6.  If the light kit does not work, turn off the electricity and lower the canopy on 

your ceiling fan. Make sure the blue wire is connected to black household 

wires (please refer to electrical connections section in this manual). 

This light kit is for 
reference only, some 
model get different light 
kit, but they are installed 
in similar way   

Page 12 

Содержание Flynn


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды