manualshive.com logo in svg

GAELCO ATV TRACK, Руководство оператора

Поделиться
Скачать
GAELCO ATV TRACK Скачать руководство пользователя страница 53

9) PROBLEM:The machines do not work when they are linked up.

CHECKS

•

Check that the link cable properly connects the two machines.

•

Follow the instructions in Section 8. The error message descriptions are set out in
Section 6.4 (Link Mode).

10) PROBLEM: There is no sound or it is of poor quality.

CHECKS

•

Change the volume on the Control Panel.

•

Carry out a sound test (see Section 6.5)

•

Check the connections.

11) PROBLEM: The fluorescent tube fails to light

CHECKS

•

Check the fluorescent tube by removing the mounting plate (ATV-517). To do this,
remove the four screws (ATV-959) show in the illustration in Section 10.5. Use a step
ladder or other firm support when doing so. For safety reasons, it is strictly forbidden to
clamber over the monitor casing.

NOTES

...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................

GAELCO - ATV QUADS TRACK

53

Содержание ATV TRACK





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды