x
can be any number.
5.
Once your computer has an IP address, run the IPEdit program to search for the camera.
For NC1000-L10 wired camera, you can use the IPEdit to configure your camera.
For NC1000-W10 wireless camera, please click on wizard to configure your camera.
When a camera shows up on the list, its IP address should be 169.254.1.13. Highlight the camera, then
click on “Wizard”.
6.
Through the wizard, you can set the camera to your own settings. Once your camera is
connected wirelessly, the WLAN LED will start flashing.
Gadspot, Inc.
Tel. 626-442-5588
10505 Valley Blvd Suite#638
Fax. 626-579-6666
El Monte, CA 91731
Email. [email protected]
