background image

 

 

3.  Network Configuration 
 

IP Installer is a utility that provides an easier, more efficient way to configure the IP address and network 

settings of the devices. It even provides a convenient way to set the network settings for multiple devices 

simultaneously using the batch setting function. Moreover, IP Installer can save the network settings for all 

devices as a backup and restore them when necessary. NOTE: Default mode for N600 is DHCP.   

 

Preparation before IP Assignment 

1. 

Always consult your network administrator before assigning an IP address to your server in order to avoid 

using a previously assigned IP address. 

2. 

Ensure the N600 is powered on and correctly connected to the network. 

3. 

MAC Address: Each device has a unique Ethernet address (MAC address) shown on the label of the device 

as the serial number (S/N) with 12 digits (e.g. 000429-XXXXXX). 

 

4. 

Although the IP Installer is able to find and configure any N600 on the LAN except those that are behind a 

router, it is a good idea to set the host PC to the same subnet. In order to connect to the Web-based user 

interface of the camera, the host PC must be in the same subnet. For more information about subnets, please 

consult your network administrator. 

 

Using IP Installer to Assign an IP Address to N600 

1. 

Once IP Installer has been successfully installed on the PC, double click the IP Installer icon on the desktop 

 

2. 

Click the 

[Device Search]

 to search the device in the LAN. 

*0004290000
B1 

Содержание N600E
























































Отзывы: