Gadhouse MATHIS, Руководство пользователя

Страница: 9 / 12

4. USB-Encoding
Visit our tutorial page to see the instruction of both macOS/Windows
operating system
www.gadhouse.com/tutorial or QR code below;
TROUBLESHOOTING GUIDE
To keep the warranty valid, never try to repair the product yourself. If you
encounter problems when using this product, check the following points
in the table below before requesting service. If the problem remains
unsolved, directly contact customer service
e-mail: Customerservice@gadhouse.com
Problem
Troubleshooting guide
There is no power:
The platter doesn’t
turn although the
unit is switched on:
No signal through
one or both
channels:
Strong hum on
phono input:
· The turntable is not connected to the
power adapter.
No power at the outlet.
· The unit is not connected to the main
power supply.
· No power at the outlet.
Drive belt is not installed or has
slipped off.
· Phono input not selected on amplifier.
· Amplifier not switched on.
· Amplifier or speakers muted.
No connection to the speakers.
No connection between turntable and
amplifier
Wire leads not connected the cartridge.
· No ground connection from cartidge, arm,
or arm cable to amplifier or ground loop.
Turntable is too close to speakers.
3. Stereo System Connection
Set the PHONO & Line Out Switch on LINE mode. The RCA PHONO & Line
Out Jacks output analog line-level signals and could be connected directly
with a par of active/powered speakers of the appropriate input of your
stereo system.
The Red plug connects with the Right channel and the White plug
connects with the Left channel.
NOTE: The RCA Jacks are not designed to be connected directly to the
passive/unpowered speakers on LINE mode. If connected to the passive
speakers, there is no sound.
16
17