Gadhouse Brad retro, Руководство пользователя

Страница: 16 / 28

16
TROUBLESHOOTING GUIDE
To keep the warranty valid, never try to repair the product yourself. If you
encounter problems when using this product, check the following points
in the table below before requesting service. If the problem remains
unsolved, directly contact the Brad model’s customer service e-mail:
brad@gadhouse.com.
Problem Troubleshooting guide
The Brad record player
does not operate
No sound from the
Brad record player.
Tone arm (15) will not
move
Needle (13) does not
lower onto record.
Music from record too
slow or too fast
Records keep skipping
• Make sure the power cord is plugged into
a wall outlet and plug the connector into the
power jack (17) on the unit.
• Turn off the product, and then turn it on
again.
• Ensure the Volume Control Knob (2) is
turned up.
• Ensure the Stylus guard is removed.
• Check the position of the needle (13) to
insure it has not shifted out of its proper
position.
• Read the information under “Unpacking
and power source” topic in this booklet
• Lower the lifter lever.
• Make sure the replacing new needle is a
genuine Gadhouse brand replacement sty-
lus. (see more information under “Replac-
ing the needle” topic)
• Make sure the Speed Control Switch (6)
is correctly set for the record being played
(33
⅓
, 45, or 78 RPM). (can check the speed
on its record)
• Ensure the turntable is on a flat, level
surface.