How to use:
Using your device for handsfree calls when in Bluetooth
®
mode:
• Use the < button on the side of the speaker (between the volume buttons) to answer a phone call (when in Bluetooth
®
mode) and then to hang up the
call when finished
• Use the < button to redial the last call with a quick double press
• A single press on the + button will forward to the next track. A single press on the - button will switch to the previous track
• Hold the + button to increase the volume
• Hold the - button to decrease the volume
• Alternatively, you can use the volume control on your device to adjust the volume
• Use the mic situated on the side of the speaker during handsfree calls
Note: sound performance can be affected by transmitting distance, poor signal and other factors. see troubleshooting for more information.
LeD Indicator status:
LED light found on the base of the speaker.
Red LED on
Charging
Red LED off
Fully charged
Blue LED flashing quickly
Bluetooth
®
pairing
Blue LED flashing slowly
Bluetooth
®
paired successfully
troubLesHootINg:
1. Handsfree call functionality is only available when Bluetooth
®
device is connected and paired.
2. Handsfree call functionality can be interrupted with interference from time to time, especially with high-frequency electromagnetism.
3. Some terminal audio players manage automatic switching between songs differently and you may experience some POP noise in the interval
between songs from time to time.
4. If you experience issues connecting the Bluetooth
®
device, please delete the Bluetooth
®
device from the list, reactivate the Bluetooth
®
speaker,
search for the device and re-pair it.
5. Poor signal environments will affect sound playback performance. Moving the speaker to a better signal area will restore performance.
6. Low battery capacity may also affect playback performance. Recharge the device using the cable provided to restore performance.
7. Only the silicone housing is water resistant, allowing use of the speaker outdoors. Please note that the inner structure and components
are not waterproof.
system specIfIcatIoNs:
Power supply:
DC, 5V
Output power:
3W (1kHz, THD10%)
Frequency:
200Hz-20kHz
Signal/noise ratio:
≥85dB
Impedance:
4 Ohms (Ω)
Li-ion output voltage:
3.7V-4.2V±0.05V
Li-ion input voltage:
5V
Lithium battery capacity:
300mAh
Music play time:
Two hours at maximum volume
Charging time:
<2 hours
Speaker unit:
40mm
Содержание 8045551
Страница 1: ......
