10
After the monitor is installed, keep your cables neat
and organized by running them through the cable
channel in the column.
Cable Organization
Adjusting the Monitor Height
Important!
When adjusting
monitor height, support the
bottom of the monitor with
one hand. The other hand will
support the monitor from
above and operate the lever.
This will prevent the monitor
from accidentally rising too
quickly or tipping over.
1.
With the monitor
attached, press the
lever towards the
monitor.
2.
Adjust the monitor to
the desired height, and
release the lever.
Tilt
To adjust the viewing angle,
tilt the monitor up and
down by 15°.
You may need to increase
the tilt tension for larger
and heavier monitors.
Tighten the tilt tension
screws by turning them
clockwise with hex key (K).
For smaller and lighter
monitors, decrease the
tilt tension by turning the
tilt tension screws
counterclockwise.
Rotation
To change the orientation of a
monitor from landscape to
portrait, turn the monitor while
it’s attached to the VESA plate.
Mainmast
DMS-202
Mainmast
DMS-202
Swivel
For optimum monitor position, the
column swivels 40° to the left and right.
Hold the monitor on both sides to
position it at the preferred angle.
