Attaching the Arm to a Wall
W-C
2X
B
W-A
2X
A
6
1.
Mark the stud location with a pencil.
2.
Place a level along the side of the mounting
plate, and use the plate as a template to
mark the location of the holes.
3.
Use a 3/16-inch (4.5 mm) bit to drill a hole
2.2 inches (55 mm) deep.
4.
Attach the arm to the wall with the
washers (W-C) and screws (W-A).
5.
Once the Arm is
attached, place the
caps (B) into the
holes.
Wood Wall Studs
Optional:
Use a stud finder to locate the studs in the wall.
LeviTouch GPW-50
LeviTouch GPW-50
LeviTouch GPW-50