14
Post-Installation Adjustment
M
1X
N
1X
Once your display is mounted on the wall bracket, you can fine-tune adjustments to the horizontal level +3° to -3°, depth from the wall
1.8 to 20 inches, tilt +10° to -15° and pivot 180°.
Horizontal Level
Loosen the three hex nuts with the included box-end wrench, and adjust
the horizontal level +3° to -3°. Use the bubble level to make sure your
display is level, then tighten the screws until secure.
Tilt Angle
Adjust the top and bottom tension screws to the desired friction and
tilt the display up or down +10° to -15°.
+3°
-3°
+10°
-15°
