manualshive.com logo in svg

Gables Engineering G7490-07, Руководство пилота

Поделиться
Скачать
Gables Engineering G7490-07 Скачать руководство пользователя страница 5

 Pilot’s Guide

  

 

G7490-07 

 

G7490-07 (Flight ID/ATC/TCAS) System Description 

This control panel is capable of controlling two Dual Mode-S transponders with TCAS 
and Flight ID capabilities. This guide describes the operation of the G7490-07 Flight 
ID/ATC/TCAS control panel

.

 

 

Panel Controls and Indicators 

This section describes the control functions of the G7490-07 Flight ID/ATC/TCAS 
control panel. Refer to Figure 1 for location of controls and indicators

.

 

 

 

 
 

1. XPNDR (Transponder) Select Knob – 

Rotate to select transponder system 1 or system 2.

 

2. IDENT (Identification) Button – 

Press to transmit identification information.

 

3. XPNDR (Transponder) FAIL Indicator – 

Illuminates when a failure is encountered.

 

4. FID (Flight Identification) Indicator – 

Illuminates when Flight Identification (FID) mode is selected.

 

5. ATC (Air Traffic Control) Indicator – 

Illuminates when the ATC mode is selected.

 

6. Display – 

Digital indication of ATC or FID codes.

 

7. Keypad Buttons – 

Press these buttons to enter the ATC or FID code.

 

8. CLR (Clear) Button – 

Press to go back one space, or press and hold for 2 seconds to clear display.

 

9. ENT (Enter) Button – 

Press to validate and transmit a Flight ID code.

 

10. ATC/FID Button –

 Press to switch between the ATC and the FID modes.

 

11. ABS Button – 

Press to change traffic altitudes from relative to absolute.

 

12. RNG+ and RNG- Buttons – 

Press to increment/decrement TCAS display range to 5, 10, 20, or 40 nm.

 

13. Mode Select Knob – 

Rotate to select mode.

 

14. TEST Button – 

Press to initiate functional test.

 

 
 
 

Figure 1 – G7490-07 Controls and Indicators 

 

G7490-07 Pilot’s Guide Rev 01 
COPYRIGHT © Gables Engineering, July 28, 2004

 

 

Page 1 of 17 

 

Содержание G7490-07























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды