JONAH NIGHTSTAND
ASSEMBLY INSTRUCTION
-
If the floor is uneven adjust the levelers located at the underside of the Leg, to do this lift Up
the side that need to be elevated to provide access to the levelers, turn the leveler until
adequate contact with the floor.
Attach one of the Brackets (C) horizontally to the top of the back of the Desk using the Small
Screws (A).Screw the remaining Bracket (C) vertically 1 inch below the brackets attached to the
Desk using the large screws (B). The Large Screws (B) should be screwed into a stud in the wall.
Align the Brackets vertically and string in the Retention Belt (D). Confirm Strap is securely laced
and locked.
Page 2 of 2
STEP 2
STEP 1
Leveler
D
C
B
A
Wall
