GABBY GLENWOOD SCH-168200 Скачать руководство пользователя страница 2

Страница: 2 / 4

SCH-168200 GLENWOOD NIGHTSTAND - BLACK

ASSEMBLY INSTRUCTION

- Place the Nightstand on its back . Insert each Feet (F) into the given female receiving slots and

turn the Bun Feet clockwise into place.

- If the floor is uneven adjust the levelers located at the underside of the Feet, to do this lift Up

the side that need to be elevated to provide access to the levelers, turn the leveler until

adequate contact with the floor.

Page 2 of 4

Allen key

Step 1

Body

Feet

Option 1 – Without Back Splash

Step 2

Содержание GLENWOOD SCH-168200

Страница 1: ...cs Feet D 1 Pc Body HARDWARE INCLUDE A 3 Bolt B 3 Shim Flat Washer C 1 Anti Tip Kit I 2 Small Screw II 2 Large Screw III 2 Bracket IV 1 Retention Belt PARTS INCLUDE D 1 Body E 1 Back Splash F 4 Feet E 1 Pc Back Splash A 3 Pcs Bolt Tools Not Included Screw Driver B 3 Pcs Shim Flat Washer C 1 Set Anti Tip Kit ...

Страница 2: ...ing slots and turn the Bun Feet clockwise into place If the floor is uneven adjust the levelers located at the underside of the Feet to do this lift Up the side that need to be elevated to provide access to the levelers turn the leveler until adequate contact with the floor Page 2 of 4 Step 1 Body Feet Option 1 Without Back Splash Step 2 ...

Страница 3: ...ly 1 inch below the brackets attached to the Nightstand using the large screws II The Large Screws II should be screwed into a stud in the wall Align the Brackets vertically and string in the Retention Belt IV Confirm Strap is securely laced and locked Page 3 of 4 SCH 168200 GLENWOOD NIGHTSTAND BLACK ASSEMBLY INSTRUCTION III II I IV WALL Step 3 ...