11
4. PROBLEMAS Y SOLUCIONES
El ECOMBI no calienta
Comprobar que el ECOMBI no esté cubierto o las entradas de aire inferiores obstruidas. Si el
limitador térmico LR ha actuado será necesario rearmarlo manualmente
El ECOMBI no calienta lo
suficiente
Comprobar que la temperatura seleccionada sea la adecuada. Es posible que la habitación necesite
más potencia de calefacción.
El display muestra “Err1”
Problema en la sonda de temperatura. Contacte con el Servicio de Asistencia Técnica.
El teclado no responde
Si el display muestra [ - - ] el teclado del ECOMBI se encuentra bloqueado. Mantener pulsadas las
teclas “+” y “-” durante unos segundos para desbloquearlo.
5. MANTENIMIENTO
Estos emisores con acumulación no precisan de ningún tipo de mantenimiento especial, proporcionando confort térmico
durante largas temporadas.
Limpie el polvo con un trapo suave y seco, sólo cuando la unidad esté desconectada y fría.
No utilice disolventes ni productos abrasivos.
Al finalizar la temporada de calefacción desconecte el equipo mediante el interruptor situado en la parte posterior.
Este emisor acumulador ha sido fabricado dentro de un sistema de calidad asegurada y conforme a procesos respetuosos con el
medio ambiente.
i
ECOMBI ha sido fabricado bajo un completo sistema de aseguramiento de la calidad y usando procesos respetuosos con el
medio ambiente. Una vez finalizada la vida útil del aparato, llévelo a un punto limpio para que sus materiales puedan ser
reciclados de forma adecuada.
6. ESQUEMA DE CONEXIÓN
I
Interruptor
general
R1, R2, R3, R4
Resistencias acumulador
RE Resistencia
emisor
LA
Limitador
acumulador
LE Limitador
emisor
LR
Limitador rearme manual
K Teclado
MB
Placa
electrónica