G21 Off road 10, Руководство пользователя

Страница: 5 / 36

Control devices
1. Adjust the Balance of the board:
Put the appliance on the ground, and keep power off. Press the Power button and keep it for
3S~5S until you hear a sound and Power light flashes for 3 – 6 times. After the flashing, reboot the
board. The balance has been adjusted. This process must be performed whenever you feel that
the appliance does not have the correct balance.
2. Adjust the Mode of the board:
Dual mode setting of the board:
A-Learning Mode. Low sensitivity mode, Max. 10km/h.
B-Sport Mode: High sensitive mode, Max. 16km/h.
After switching on the appliance is automatically set to the default mode A.
Keep the board powered off and press the Power switch button twice to switch on the Sport Mode.
3. Bluetooth
It is possible to pair the appliance with mobile phone via Bluetooth and play the music.
4. Remote control
The appliance is equipped with remote control device with remote control distance of about 5 m.
Lock Button:
when it is powered on and without a riding person, press this button to lock the
appliance (Power Light is off, but Appliance is still powered on).
Unlock Button:
when the appliance is locked and without a riding person, press this button to
unlock the appliance (Power light is on, and go on to ride).
Mode button:
when the appliance is unlocked and without a riding person, press this button to
switch mode.
Mode A:
for learning, speed max. 10 km/h
Mode B: for sport, speed max. 16 km/h
Pedal sensor
The appliance is equipped with 4 sensors below pedals. When user steps on the pedals, the
appliance sets the balance mode.
• Before driving, always make sure that there are no objects on the pedals.
• Please, never put foreign objects on the pedals. It might happen that you would not be able to
stop the appliance during driving.
Light display
The display panel is located in the middle part of the appliance.
Battery status:
A - The Power light is green, the baterry is charged at more than 10%. It is safe to ride.
B – The Power light is red and beeping, the battery is charged less than 10%, it must be charged
immediately! The board will slow down.